21
5.4.3 Status Icons
Type
Icon
Content
Power
Using external power.
Using internal battery. The level of battery is
displayed in percentage. The lamp will start to flash
when the level is very low.
No battery.
Charging battery.
Backup
Battery
warning
This icon will be displayed when back-up battery
(for storing parameters and data) is very low.
Heater
Status
Blue: Ready Mode Red/Yellow: Heating Mode
Cooling Mode *
Error Occurring
Running
Mode
Splicing is triggered by closing the wind shield.
Splicing process goes on until the end of splicing.
Splicing process pauses once before arc discharge.
Splicing process pauses at each sub-step.
Splicing is triggered by pressing the Start key.
Splicing process goes on until the end of splicing.
Splicing process pauses once before arc discharge.
Splicing process pauses at each sub-step.
Semi-Auto mode. The fiber is loaded to the center
by closing windshield, and stops temporarily.
Splicing is triggered by pressing the Start key.
Data
Output
Various measurement and calculation information is
shown on the fiber image area.
*) The cooling fan will temporarily pause during splicing, but the icon will remain on
cooling mode. After splicing has finished, the cooling fan will go on again if the
temperature is still high.