5
2. Safety Information and Instructions
This manual contains complete operating and maintenance instructions for
the NJ001 Fusion Splicer. Please review this manual carefully before
operating.
2.1 Safety Information
The following safety instructions must be observed during NJ001 fusion
splicer operation, serviced or repaired. Failure to comply with any of these
instructions or with any precaution or warning contained in the User’s
Manual is in direct violation of the standards of design, manufacture and
intended use of the instrument. Furukawa Electric Co., Ltd. assumes no
liability for the customer’s failure to comply with these safety
requirements.
2.2 Safety Messages
The following messages may appear in the User’s Manual. Please observe
all safety instructions that are associated with the message.
Refer to the User’s Manual for instructions on handling
and operating the instrument safely.
WARNING
The procedure can result in serious injury or loss of life if
not carried out in proper compliance with all safety
instructions. Ensure that all conditions necessary for safe
handling and operation are met before proceeding.
CAUTION
The procedure can result in serious damage to or
destruction of the instrument if not carried out in
compliance with all instructions for proper use. Ensure
that all conditions necessary for safe handling and
operation are met before proceeding.