24
It is possible that the battery could not be fully charged, if
moving the battery from a cold place (<5°C) to a warm place
(around 20°C) and then immediately charging it. In this case,
make sure the battery is in the new environment for a short
while to equalize the temperature, and then charge the battery.
When charging the battery, the room temperature must be in
the range of 5 - 40°C.
6.1.3 Turn Splicer ON and OFF
Keep pushing power key (for about 2 seconds) to turn on/off.
Turning ON power
The opening message will
appear on the LCD screen for a
short while, before the ready
screen showing up.
Turning OFF power
The LCD screen is turned off.
The power supply cuts after all
motors perform the reset operation.
Power
Key