66
<Capture>
1.
Select “X Field” or “Y Field” to store the image.
Press Enter (the image is then stored).
2.
Press Escape to return to the previous screen.
<Delete Data>
1.
Select data with ▲▼ and
◄
►
and press
Delete to erase it.
2.
Press Escape to return to the previous screen.
8.4.6 Fiber Edge Inspection
Measuring the cleave angle.
1.
Select “Fiber edge inspection” and press
Enter.
2.
Set the fiber you want to measure. And, close
the windshield and press .
The fibers are fed. Cleave angles are subsequently displayed on the
right side of the screen after cleaning the arc discharge.
A result of measurement is judged based on a chosen splice program.
If the measurement angle is bigger than the check limit value, the
angle is indicated by the red character. Even when the fiber edge is bad,
it is displayed as an error.