9
CAUTION
Do not put heavy items on the cords. Doing so may damage the
cords which may cause fire or electrical shock.
Do not modify the cords and do not over-bend, over-twist, or
over-stretch the cords. Doing so may cause fire or electrical shock.
Ensure that the cords are disconnected and the batteries are
removed from machine’s main body when storing the fusion
splicer.
Never use aerosol dust cleaners or alcohol-based solvents to clean
the electrodes.
Non oil-based solvents should be used to clean the optical lenses.
Store the fusion splicer in a cool dry place.
When the temperature of the splicer body is different from the
operating temperature limit extremely even if the environment
temperature is in the operating temperature limit, please use after
the temperature of the splicer body near the operating
temperature. Or, the splicer might not work normally.
The battery is made of Li-polymer battery cells. Refer to following safety
instructions on handling and operating the Battery safety.
CAUTION
Do not dispose the Battery in fire, or leave the Battery near a
high-temperature object. Doing so may cause fire or explosion.
Do not short-circuit the recharging connector or the output
terminal for splicer. Doing so may cause fire by generation of heat.
Charge the S946 battery by NJ001. If charging by other equipment
that is not suitable for charging S946 battery, it may cause fire.