Furukawa electric FITELNINJA NJ001, User Manual, Page: 28 / 94

27
The NJ001 Fusion Splicer is installed with the factory-set Heat Programs as
follows.
No. Mode Comment Description
1 40MM S922 Furukawa S922 sleeve (40mm)
2 40MM S922 POWER Furukawa S922 sleeve (40mm) with
pre-heating.*
3 40MM OTHER Other 40mm length sleeve
4 40MM SMOUV
POWER
TE connectivity SMOUV-02 sleeve
(40mm) with pre-heating.*
5 ---- --- Vacant
6 ---- --- Vacant
7 60MM S921 Furukawa S921 sleeve (60mm)
8 60MM S921 POWER Furukawa S921 sleeve (60mm) with
pre-heating *
9 60MM OTHER Other 60mm length sleeve
10 60MM SMOUV
POWER
TE connectivity SMOUV-01 sleeve
(60mm) with pre-heating.*
11 60MM CONTINUOUS Heating continuously for 60mm
12 ---- --- Vacant
13 40MM S924 Furukawa S924 sleeve (40mm)
14
40MM S924 POWER Furukawa S924 sleeve (40mm) with
pre-heating *
15 40MM S927B Furukawa S927B sleeve (40mm)
16 40MM S927B POWER Furukawa S927B sleeve (40mm) with
pre-heating *
17 MINI S928A Furukawa S928A sleeve
(20/25/30mm length)
18 MINI OTHER Other 20/25/30mm length sleeve
19
:
27
28 60MM S921DC Furukawa S921DC sleeve (60mm)
29 --- SOC 20mm length sleeve for SOC
30 --- CURL REMOVE Removing giber curl
*) Pre-heating warms the heater to shorten the heating time in advance, before the
heating program starts. Pre-heating starts after arc discharge and heating process.