28
When the NJ001 is turned on, the last program used is selected
automatically.
The curl removing program is installed in program No.010.
The curl-removing program can be selected from the heater
program menu. Additionally, it can be selected by long
pressing the heating key, when the heating status icon is blue.
It automatically returns to the heating program of the previous
state, when all processes of curl-removing end once.
When doing curl-removing heating, set the fiber which isn't
prepared in a heater. Please close the clamp in both sides and
the cover like usual heating.
6.2.3 Selecting the Operating Language
The NJ001 fusion splicer can be set to provide operating prompts in several
languages. The default operating language is English.
1.
In the Ready screen, press Menu to access the Menu screen.
2.
Select “Setting” and press Enter.
3.
Select “Parameter” sub-menu and press Enter.
4.
Select “Language” and press Enter.
5.
Pop-up window shows the current language. Press ▲ ▼ to scroll the
languages and press Set to change.
6.
Press Escape and the pop-up window will
confirm the change. Select “Over write”
to confirm the change, or “Cancel” to
cancel the operation and press Enter.
7.
Press Escape repeatedly until the Ready
screen is displayed.