64
8.4.4 Manual Splicing
Manual splicing allows the entire cycle of splicing to be operated manually
using the keypad.
1.
Select “Manual Splicing” in the Tool menu screen and press Enter.
2.
Select the preferred operating mode and press Enter. Load fibers
before selecting “Semi Auto”.
Semi Auto: Fibers are automatically fed and stopped at pre-splice
position. Splice is done by manual operation as described below.
Manual: All operations are done manually following the procedures.
3.
The fibers are fed to the pre-splice position by pressing Enter in the
“Semi Auto” mode.
4.
Select “Manual” and press Enter to initiate manual operation (see
picture to the right). The left window shows the fiber image, and the
right window displays the motion control commands.
5.
The active motion control command is highlighted in red. Move to other
motions by pressing ▲▼. Press
◄
►
to change the value or to activate
the function. In “Arc” and “Reset”, press Execute to activate the action.
6.
Press Escape to return to the previous screen.