67
3.
When measuring other fibers, please press Next. When ending, please
press Escape.
The inspection is possible only at one side. Please set fiber in
either and measure.
8.4.7 Sleeve Shrink Adjustment
Optimize shrinking condition for the sleeve.
1.
Select “Sleeve Shrink Adjustment“.
2.
Select a pattern (A~E) that is similar to the current shrinking condition
of the sleeve. And press Enter.
Code
Condition of Sleeve
A
Not shrinking enough at sleeve end
B
Bubble in the center of sleeve
C
Fiber coating melts
D
Sleeve melts too much
E
Default to the factory setting
3.
The heating condition is adjusted so that the shrinking condition for the
sleeve becomes better.
4.
If the adjustment is insufficient, repeat the above operation.