26
The NJ001 Fusion Splicer is installed with the factory-set Fusion Programs
as follows.
No. Mode
Comment
Description
1
SM1
SINGLE MODE
Standard single SM fiber
2
MM1
MULTI MODE
Standard single MM fiber
3
DS1
DISPERSION SHIFT Standard single DS fiber
4
NZ1
NON ZERO DS
Single None-Zero DS fiber
5
G657
G657
Single Bend-Insensitive SM fiber
6.2.2 Heater Program
1.
Press Menu to display the menu screen.
2.
Select heater program and press Enter, and the “Heater PRGM” screen
is displayed.
3.
Select the proper program by pressing ▲ ▼ and press Select .
4.
Press Escape repeatedly until the ready screen is displayed.