Fukuda Denshi IB-7300, Service Manual

Page: 143 / 146

Periodic Check List (HC-500)
Periodic Check List
No. .
Item Inspection Method / Criteria Judgment Comment
1.Capnostat Sensor Check visually damage, flaw OK / NG
2.Airway Adapter Check storage conditions. OK / NG
Cord
Accessories
3.Operation Manual Must be kept as specified. OK / NG
1.Flaws, Cracks, Deformation and
Rust Must be free from damage. OK / NG
2.Panel and Label Not be damaged, scratched or
erased
OK / NG
Ap
p
earan
c
e
Appearance
3.Key, LED and Other Must be free from damage. OK / NG
1.Key Must operate property. OK / NG
2.Input Connector Must perform normally. OK / NG
3.Fan No abnormal sound is heard. OK / NG
Mech
an
ica
l
Module
4.Ventilation Hole Not be block.
OK / NG
1. Warm up Must be complete. OK / NG
2. Zero Calibration Must be complete.
The Zero lamp is OFF. OK / NG
3. Reference Calibration Must is complete. OK / NG
4. Airway Adapter Calibration Must be complete.
The Adapter lamp is OFF. OK / NG
5. Operating Must display CO
2
waveform
and value.
OK / NG
Electrical
Function
6. Sensor Detection Must disappear CO
2
waveform and
value when unplugging sensor.
OK / NG
1.Enclosure Leakage
Current(N.C.) Less than 0.1mA OK / NG
2 .Enclosure Leakage Current
(S.F.C.)
Less than 0.5mA OK / NG
3.Patient Leakage Current
Ⅰ
(N.C)
Less than 0.01mA OK / NG
4.Patient Leakage Current Ⅰ
(S.F.C.)
Less than 0.05mA
OK / NG
Leakage
Current
5.Patient Leakage Current Ⅲ
(S.F.C.)
Less than 0.05mA OK / NG
Safety
Withstanding
Voltage
1.Between Isolated applied part
and Enclosure AC1.5kV/1min OK / NG
Overall Judgment
OK / NG
Equipment
CO
2
Module
Model
Type
HC-500
Serial
Number
Installation
Place
Date of
Purchase
Date of
Inspection
Inspector Approval
10
－
24