Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 882 / 898

882 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7
Appendix
Pos. Component Reference
1
Optional rear fans
(fans 5-6)
"Replacing rear fan modules" on page 389
2 Expansion card slots 1-4 "Replacing expansion cards" on page 415
3
Memory modules
(channels E/F) "Replacing memory modules" on
page 545
4
Processor 2 /
CPU heat sink
"Installing processors" on page 551
5
Expansion card slots 10
for SAS RAID cards
"Replacing expansion cards" on page 415
6
Memory modules
(channels C/D) "Replacing memory modules" on
page 545
7 UFM board "Replacing the UFM board" on page 767
8 System fans (fans 1-4)
"Replacing system fan modules" on
page 372
9
Battery backup units /
Flash backup units "Replacing a BBU" on page 511
"Replacing an FBU" on page 516
10 HDD / SSD drive bays
"Hard disk drives / solid state drives" on
page 189
11 Intrusion switches
12 Front panel module bay
"Replacing the front panel module" on
page 700
13 Accessible drive bay "Accessible drives" on page 597
14 TPM board "Replacing the TPM board" on page 784
15 CMOS battery
"Replacing the CMOS battery" on
page 754
16
Memory modules
(channels A/B) "Replacing memory modules" on
page 545
17
Processor 2 /
CPU heat sink
"Installing processors" on page 551
18
Memory modules
(channels G/H) "Replacing memory modules" on
page 545
19
Expansion card slots 5-9
for GPGPU card
"Replacing a GPGPU card" on page 472