Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 161 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 161
Basic software procedures
5.2.19 Specifying the chassis model
In order to have your server displayed correctly as a rack system in the
ServerView management user interface after a chassis conversion, the chassis
model setting needs to be updated.
This can be accomplished using the ServerView Installation Manager or
Maintenance Tools:
Using the ServerView Installation Manager
Ê
Boot the system from the ServerView Suite DVD 1. The ServerView
Installation Manager is being started.
Ê
Select your preferred user interface language.
Ê
Under Status backup media select No status backup and click Continue .
Ê
Select Maintenance .
Ê
Select Server Configuration Manager .
Ê
Check the box for rack model and save the setting by clicking Save .
Using the ServerView Maintenance Tools
On Windows-based servers with ServerView agents installed, proceed as
follows:
Ê
Click Start , point to All Programs , and then point to Fujitsu - ServerView Suite -
Agents - Maintenance Tools .
Ê
In the Maintenance Tools menu pane, click the Chassis Model Configuration tab.
Ê
Under Convert to click the Rack Model button.
Ê
Click
Exit
to close the
Maintenance Tools
menu pane.
I
For more detailed information on installing ServerView agents, refer to
the "ServerView Operations Manager - Installation ServerView Agents
for Windows" user guide available online at
http://manuals.ts.fujitsu.com
(
http://jp.fujitsu.com/platform/server/primergy/manual/
for the Japanese
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server.