Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 601 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 601
Accessible drives
12.2 Installing accessible drives
12.2.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing accessible drives:
– Slotted screw driver (for bending in or out accessible drive mounting
brackets)
12.2.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê
Shut down the server as described in section "Shutting down the server" on
page 67 .
Ê
Remove the AC power cords from the PSU cable brackets and disconnect
them from the system as described in section
"Disconnecting the server
from the mains" on page 68 .
Ê
When working on a rack-mounted server, extend it out of the rack as
described in section
"Extending the server out of the rack" on page 72 .
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 73 .
Ê
Open the side / top cover as described in section "Removing the top cover"
on page 75 (rack server) or "Removing the side cover" on page 84 (tower
server).
Ê
Pull out the ID card and open the front cover as described in section
"Opening the server" on page 75 .
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers.
Upgrade and Repair Units (URU)
Average task duration: 10 minutes