Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 549 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 549
11 Processors
This section provides information on how to install, remove and replace
processors and processor heat sinks.
Safety notes
V
CAUTION!
●
Do not install unsupported processors. For further information on
supported processors, refer to section
"Basic information" on
page 550 .
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
When removing or installing processors, be careful not to touch or
bend the spring contacts on the processor sockets.
●
Never touch the underside of the processors. Even minor soiling such
as grease from the skin can impair the processor’s operation or
destroy the processors.
●
For further information, please refer to chapter "Important
information" on page 47 .
In this chapter
●
"Supported processors" on page 550
●
"Installing processors" on page 551
●
"Removing processors" on page 563
●
"Upgrading or replacing processors" on page 575
●
"Handling processor heat sinks" on page 587
●
"Applying thermal paste" on page 595