Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 249 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 249
Hard disk drives / solid state drives
Ê
Install HDD / SSD modules or HDD dummy modules into the additional HDD
slots as described in sections
"Installing a 2.5-inch HDD / SSD module" on
page 208 and "Installing a 2.5-inch HDD / SSD dummy module" on
page 214 .
I
For detailed information on HDD mounting order, refer to section "2.5-
inch HDD / SSD configurations" on page 191 .
Ê
Close the side / top cover as described in section "Mounting the top cover"
on page 107 (rack server) or "Mounting the side cover" on page 114 (tower
server).
Ê
When working on a rack-mounted server, secure it in the rack as described
in section
"Sliding the server into the rack" on page 124 .
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 122 .
Ê
Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
"Connecting the server to
the mains" on page 125 .
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 156 .