Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 677 / 898

TX300 S7 / RX350 S7
Upgrade and Maintenance Manual 677
Accessible drives
Ê
Remove the air duct as described in section "Removing the system air duct"
on page 92 .
Ê
Remove the system fan holder as described in section "Removing the
system fan holder" on page 378 .
I
Removing the front cover is not required in order to replace the slimline
ODD or LSP in the 2x 3.5-inch HDD extension box.
12.6.3.3 Removing the 2x 3.5-inch HDD extension box
Ê
Remove all cables from the 2x 3.5-inch HDD extension box backplane.
Ê
Remove all cables from the slimline ODD.
Ê
Remove the LSD cable from system board connector SMB 1.
Ê
Remove the 2x 3.5-inch HDD extension box from the server as described in
section
"Removing the 2x 3.5-inch HDD extension box" on page 312 .
12.6.3.4 Removing the slimline ODD from the HDD extension box
Ê
Remove the defective slimline ODD from the 2x 3.5-inch HDD extension box
as described in section
"Removing the slimline ODD from the extension box"
on page 669 .
12.6.3.5 Removing the LSD module from the HDD extension box
Ê
Remove the defective LSD module from the 2x 3.5-inch HDD extension box
as described in section
"Removing the LSD module from the extension box"
on page 672 .
12.6.3.6 Installing the slimline ODD into the HDD extension box
Ê
Install the new the slimline ODD into the 2x 3.5-inch HDD extension box as
described in section
"Installing the slimline ODD into the extension box" on
page 657 .
12.6.3.7 Installing the LSD module into the HDD extension box
Ê
Install the new LSD module into the 2x 3.5-inch HDD extension box as
described in section
"Installing the LSD module into the HDD extension box"
on page 662 .