Fujitsu PRIMERGY TX300 S7, Upgrade And Maintenance Manual, Page: 778 / 898

778 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7
System board and components
Ê
Enable TPM in the system board BIOS. Proceed as follows:
Ê
Switch on or restart your server.
Ê
As soon as the startup screen appears, press the
[F2]
function key to
enter the BIOS.
Ê
Select the Advanced menu.
Ê
Select the Trusted Computing submenu.
Ê
Set the TPM Support and TPM State settings to Enabled .
Ê
Under Pending TPM operation , select the desired TPM operation mode.
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D2949 BIOS Setup Utilty for PRIMERGY
TX300 S7 / RX350 S7" reference manual available online at
http://manuals.ts.fujitsu.com
(
http://jp.fujitsu.com/platform/server/
primergy/manual/
for the Japanese market) or from the ServerView
Suite DVD 2 supplied with your PRIMERGY server.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 156 .