Fujitsu PRIMERGY RX2560 M2, Upgrade And Maintenance Manual

Page: 125 / 568

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
125
Basic software procedures
5.2.6.2 Resetting the boot retry counter
The boot retry counter should be reset to its original value concluding every
service task.
I
Please note, if the customer does not know about the original boot
retry values:
If the system boots up and no further errors occur within 6 hours after that
successful boot attempt, the boot retry counter will automatically be reset
to its default value. Please take into account, that the specified number
of boot attempts can only be determined after this period of time.
If the customer knows about the original boot retry values, proceed as follows
to reset or configure the boot retry counter:
Resetting the boot retry counter in the BIOS
Ê
Enter the BIOS.
Ê
Select the
Server Mgmt
menu.
Ê
Under Boot Retry Counter press the
[+]
or
[-]
keys to specify the maximum
number of boot attempts (0 to 7).
Ê
Exit the BIOS.
Resetting the boot retry counter using the ServerView Operations Manager
Ê
In the ServerView Operations Manager Administration view, select Server
Configuration .
Ê
If more than one server is managed in SVOM, select the target server and
click
Next
.
Ê
From the Server Configuration menu pane, choose Restart Options .
Ê
Under Reboot Retries , specify the maximum number of boot attempts (0 to 7)
in the Default for reboot tries field.
Resetting the boot retry counter using iRMC web frontend
Ê
Enter the ServerView iRMC web frontend.
Ê
Select the Server Management menu.
Ê
The following boot retry counter settings are available under ASR&R Options: