Fujitsu PRIMERGY RX2560 M2, Upgrade And Maintenance Manual

Page: 138 / 568

138
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Basic software procedures
5.2.17.1 Looking up MAC addresses
Ê
Enter the ServerView iRMC web frontend.
Ê
Select the System Information menu.
Ê
Under Network Inventory , you will find detailed information on each network
controller in the managed PRIMERGY server, including its MAC address.
I
This information is only available with the iRMC S4 or above.
Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.
Ê
Inform the customer about the changed MAC address.
5.2.17.2 Looking up WWN addresses
Emulex FC / FCoE adapters
Ê
Enable the network controller’s Option ROM in the system board BIOS as
described in section
"Enabling Option ROM scan" on page 123 .
Ê
Restart the server.
Ê
During boot, as soon as the Emulex BIOS utility option appears, press
[ALT]
+
[E]
or
[CTRL]
+
[E]
.
Ê
Under Emulex Adapters in the System you will find all available Emulex
adapters and their WWN addresses.
Ê
Note down the new 16-digit WWN address.
Ê
Press
[Esc]
to exit the Emulex BIOS utility.
Ê
Inform the customer about the changed WWN address.
QLogic FC adapters
Ê
Enable the network controller’s Option ROM in the system board BIOS as
described in section
"Enabling Option ROM scan" on page 123 .
Ê
Restart the server.
Ê
During boot, as soon as the QLogic BIOS utility option appears, press
[ALT]
+
[Q]
or
[CTRL]
+
[Q]
.
Ê
Under Select Host Adapter use the arrow keys
æ
/
Ë
to select the desired
FC / FCoE adapter and press
[Enter]
.