Fujitsu PRIMERGY RX2560 M2, Upgrade And Maintenance Manual, Page: 51 / 568

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
51
Important information
3.2 CE conformity
3.3 FCC Class A Compliance Statement
If there is an FCC statement on the device, it applies to the products covered in
this manual, unless otherwise specified herein. The statement for other
products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a
"Class A" digital device, pursuant to Part 15 of the FCC rules and meets all
requirements of the Canadian Interference-Causing Equipment Standard
ICES-003 for digital apparatus. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in strict accordance with the instructions, may cause harmful
interference to radio communications. However, there is no warranty that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between equipment and the receiver.
The system complies with the following requirements of the
EC directives:
2014/30/EU "Electromagnetic Compatibility"
2014/35/EU "Low Voltage Directive"
2009/125/EC "Ecodesign Directive"
2011/65/EC. "Restriction of hazardous substances"
This is indicated by the CE marking (CE = Communauté
Européenne).
V
CAUTION!
This is a Class A product. In a domestic environment this
product may cause RF interference, in which case the
user may be required to take adequate measures.