▶
If a key cylinder is attached to the front bezel, lock it (4).
The front bezel is also available without a key cylinder. In this case, the
key cylinder hole is capped.
Removing the front bezel
Figure 10: Removing the front bezel
▶
If the key is locked, release it (1).
The front bezel is also available without a key cylinder. In this case, the
key cylinder hole is capped.
▶
Press the latch on the left side of the front cover (2).
▶
Then, while pressing the latch, pull the left side of the front bezel slightly
forward (3).
▶
Remove the front bezel by sliding it to the left (4).
Basic hardware procedures
48
Upgrade and Maintenance Manual
CX400 M6
