▶
Before use, clean the ODD tray using a soft, dry cloth.
▶
As a precaution, remove disks from the ODD when the drive is not to be
used for a long time. Keep the ODD tray closed to prevent foreign matter,
such as dust, from entering the ODD.
▶
Hold CDs/DVDs/BDs by their edges to avoid contact with the disk surface.
▶
Do not contaminate the CD/DVD/BD surface with fingerprints, oil, dust, etc.
If dirty, clean with a soft, dry cloth, wiping from the center to the edge. Do
not use benzene, thinners, water, record sprays, antistatic agents, or
silicone-impregnated cloth.
▶
Be careful not to damage the CD/DVD/BD surface.
▶
Keep the CDs/DVDs/BDs away from heat sources.
▶
Do not bend or place heavy objects on CDs/DVDs/BDs.
▶
Do not write with ballpoint pen or pencil on the label (printed) side.
▶
Do not attach stickers or similar to the label side. Doing so may cause
rotational eccentricity and abnormal vibrations.
▶
When a CD/DVD/BD is moved from a cold place to a warm place, moisture
condensation on the CD/DVD/BD surface can cause data read errors. In this
case, wipe the CD/DVD/BD with a soft, dry cloth then let it air dry. Do not dry
the CD/DVD/BD using devices such as a hair dryer.
▶
To avoid dust, damage, and deformation, keep the CD/DVD/BD in its case
whenever it is not in use.
▶
Do not store CDs/DVDs/BDs at high temperatures. Areas exposed to
prolonged direct sunlight or near heating appliances are to be avoided.
You can prevent damage from the ODD and the CDs/DVDs/BDs, as well
as premature wear of the disks, by observing the following suggestions:
●
Only insert disks in the drive when needed and remove them after
use.
●
Store the disks in suitable sleeves.
●
Protect the disks from exposure to heat and direct sunlight.
Important information
CX400 M6
Upgrade and Maintenance Manual
31
