Fujitsu M10 Series, Product Notes

Page: 53 / 216

#
openssl speed -engine pkcs11 -evp AES-256-CBC
#
openssl speed -engine pkcs11 rsa2048
Note -
Enhanced Support Facility (ESF) and Remote Customer Support System (REMCS) are
supported only for SPARC M10 systems sold within Japan by Fujitsu.
SHA1, SHA224, SHA256, SHA384, SHA512
- The following encryption methods have been optimized for the SPARC64 X
processor:
DES-CBC, DES-EDE3-CBC, DES-ECB, DES-EDE3
AES-128-CBC, AES-192-CBC, AES-256-CBC
AES-128-ECB, AES-192-ECB, AES-256-ECB
AES-128-CTR, AES-192-CTR, AES-256-CTR
Here is an example on calling the accelerated version of AES method on SPARC64
X:
- The following public key encryption methods have been optimized for the
SPARC64 X processor from Oracle Solaris 11.2.
RSA512, RSA1024, RSA2048
DSA512, DSA1024, DSA2048
The following is an example of the command to invoke the RSA2048 method
optimized for the SPARC64 X processor.
■
To use the optimized digest method or encryption method in the PKCS11 engine
with an application using the OpenSSL library (libssl, libcrypto), enable the EVP
interface explained in evp(3openssl).
Notes on remote maintenance service
This section describes notes when using the remote maintenance service. See
Enhanced Support Facility User's Guide for REMCS for how to set and use REMCS.
Before setting the remote maintenance service
To use the remote maintenance service with SPARC M10 Systems, you must perform
settings for the REMCS agent function by using XSCF Web. In addition, the REMCS
agent uses timezone information of XSCF. Perform the following settings in advance
with the XSCF shell:
■
Setting necessary for using the XSCF Web, such as enabling the HTTPS setting
■
Setting the timezone for XSCF
After completing the above settings, perform settings for the REMCS agent function
Chapter 3 Information on Software 39