manualshive.com logo in svg

Fujitsu ETERNUS DX60, User Manual

The Fujitsu ETERNUS DX60 is a cutting-edge storage system designed to meet all your data needs. With its superior performance and scalability, it ensures seamless data storage and management. Enhance your user experience with the comprehensive User Manual, available for free download at our website, making setup and operation a breeze.

Share
Download
background image

Chapter 1  Overview
  1.2  Configuration

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

35

Copyright 2011 FUJITSU LIMITED

P3AM-3042-08ENZ0

1.2.5

Disks

Three kinds of drives can be installed in the device: SAS disks, Nearline SAS disks, and SSDs. 
Each is suitable for the following usage cases:

•

SAS Disk
SAS disks are highly-performance/high-reliability disks for enterprise use. SAS disks support 
24/7/365 operations and are used to store high performance databases and other frequently 
accessed data.
2.5" SAS disks take less space, consume less electrical power, and are lighter than 3.5" SAS 
disks.

•

Nearline SAS Disk
Nearline SAS disks are high capacity / cost effective disks for data backup and archive use. 
Nearline SAS disks can store information that requires a lower access rate at a still 
reasonable speed more cost effectively than the SAS disks.

•

SSD (Solid-State Drive)
SSDs are highly-performance/high-reliability drives for enterprise use. SSDs support 24/7/
365 operations and are used to store high performance databases and other frequently 
accessed data. SSDs use flash memory as their storage media and provide better random 
access performance than SAS and Nearline SAS hard disks. Containing no motors or other 
moving parts, SSDs are highly resistant to impact and have low power consumption require-
ments.
2.5" SSDs take less space and are lighter than 3.5" SSDs.

1.2.6

Host Interface

The ETERNUS DX60/DX80 supports three types of host interfaces: the Fibre Channel interface, 
the iSCSI interface, and the SAS interface. The ETERNUS DX90 supports the Fibre Channel 
interface.

•

Fibre Channel interface
Fibre Channel supports two connection topologies, Arbitrated Loop and Fabric.
Maximum transfer speed is 4Gbit/s for the ETERNUS DX60, 8Gbit/s or 4Gbit/s for the 
ETERNUS DX80, and 8Gbit/s for the ETERNUS DX90.
Fibre Channel is commonly used for database servers. A fabric connection via an FC switch 
will allow a large number of high-performance hosts to connect to a single port if required.

•

iSCSI interface
iSCSI is a communication protocol which transfers SCSI commands within IP packets over 
Ethernet, and has a maximum transfer speed of 1Gbit/s.
Since iSCSI can be installed at lower cost than Fibre Channel, it is commonly used by divi-
sions of large companies and by small-and-medium-sized companies.
In order to secure iSCSI performance, it is recommended that the iSCSI network be physi-
cally separated from other typical purpose networks such as those used for Internet access 
and file transfer.

•

SAS interface
SAS (Serial Attached SCSI) is a serial transfer host interface that is as reliable as the normal 
(parallel) SCSI interface, but has a higher maximum transfer speed of 3Gbit/s.
SAS is used to connect servers and DAS (Direct Attached Storage) devices and, while provid-
ing less expandability than a SAN connection, is still suitable for small-sized systems.

Summary of Contents for ETERNUS DX60



















































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX60

Samsung SRD-1670DC Properties preview
SRD-1670DC
Brand: Samsung Pages: 7
Ratoc Systems RS232C User Manual preview
RS232C
Brand: Ratoc Systems Pages: 36
Navigloo 3500 Assembly Instructions preview
3500
Brand: Navigloo Pages: 3
C&H Technologies EM405-8 Manual preview
EM405-8
Brand: C&H Technologies Pages: 46
Razberi V8 Core Manual And Getting Started Manual preview
V8
Brand: Razberi Pages: 113
IBM Netfinity 6000R User Reference Manual preview
Netfinity 6000R
Brand: IBM Pages: 218
IBM eserver xSeries 440 Troubleshooting Manual preview
eserver xSeries 440
Brand: IBM Pages: 74
IBM eserver xSeries 440 Installation Manual preview
eserver xSeries 440
Brand: IBM Pages: 98
IBM eserver xSeries 440 User Manual preview
eserver xSeries 440
Brand: IBM Pages: 84
IBM Eserver xSeries 360 Type 8686 User Reference Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 184
IBM eserver xSeries 350 Installation Manual preview
eserver xSeries 350
Brand: IBM Pages: 62
IBM eServer xSeries 135 Installation Manual preview
eServer xSeries 135
Brand: IBM Pages: 62
IBM TotalStorage DS4800 Installation, User And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 250
IBM TotalStorage DS4800 User, Installation And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 234
IBM eserver pSeries 690 User Manual preview
eserver pSeries 690
Brand: IBM Pages: 212
IBM T400 Setup, Operation, And Service Manual preview
T400
Brand: IBM Pages: 136
IBM System x3690 X5 At-A-Glance Reference Manual preview
System x3690 X5
Brand: IBM Pages: 32
IBM System x3690 X5 At-A-Glance Manual preview
System x3690 X5
Brand: IBM Pages: 33

Brands by name

Popular brands

Load more brands