Chapter 8 Installing Optional Products
8.1 Disk Installation
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
192
Copyright 2011 FUJITSU LIMITED
P3AM-3042-08ENZ0
5-2
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
5-3
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
5-4
Check that the newly installed disk’s DISK READY LED lights up green after
approximately 30 seconds.
6
Repeat
and
for each additional disk.
7
Remove the wrist strap.
8
On the Storage System Status screen of GUI, check that the added disks have
been recognized.
9
Set up RAID groups, volumes, hot spares, and Host Affinity settings on the new
disks, as required.
End of procedure
IMPORTANT
Hold the disk with both hands to protect against jarring.
Lock lever
