Fujitsu ETERNUS DX60 User Manual Download Page 113

Page: 113 / 242

Chapter 6 Cable Connection
6.3 Fibre Channel Cable Connection (For Fibre Channel)

ETERNUS DX60/DX80/DX90 Disk storage system User Guide

113

P3AM-3042-08ENZ0

Procedure

Remove the connector cover of Fibre Channel port.

Remove the connector cover attached to the Fibre Channel port of the controller 0 (CM#0)
or controller 1 (CM#1).

Connect the Fibre Channel cable to the ETERNUS DX60/DX80/DX90.

2-1

Remove the covers from the Fibre Channel cable connectors.

2-2

Insert the Fibre Channel cable connectors in the controller 0 (CM#0) and controller 1
(CM#1) Fibre Channel ports.

IMPORTANT

Keep the removed connector cover in a safe place where they will
not be lost.

Connector cover

Summary of Contents for ETERNUS DX60

















































































































































































































































Search results

Summary of Contents for ETERNUS DX60

Reviews:

Related manuals for ETERNUS DX60

Brands by name

Popular brands

Fujitsu ETERNUS DX60, User Manual

Search results

Summary of Contents for ETERNUS DX60

Reviews:

Related manuals for ETERNUS DX60

Brands by name

Popular brands