Fuji Xerox DocuPrint CP215 Series, User Manual

Page: 191 / 246

Troubleshooting 191
 Fog
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
 Bead-Carry-Out (BCO)
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
The printed result is foggy. When the whole is printed light, contact the Fuji Xerox local
representative office or an authorized dealer.
When the printed page is partly light, start
Developer Stir Mode .
1 Launch the Printer Setting Utility, and click Developer Stir Mode
on the Diagnosis tab.
2 Click the Start button.
Problem Action
Bead-Carry-Out (BCO) is
happening. If the printer is installed in a high altitude location, set the altitude of
the location.
1 Launch the Printer Setting Utility, and click Adjust Altitude on the
Printer Maintenance tab.
2 Select the value close to the altitude of the location where the
printer is installed.
3 Click the Apply New Settings button.