Fuji Xerox DocuPrint CP215 Series User Manual Download

Page: 152 / 246

152

Using the Operator Panel Menus

Understanding the Printer Menus

This section describes menu options that can be accessed by pressing the

(

Menu

) button on the

operator panel.
This section includes:

• "Information Pgs" on page 152
• "Billing Meters" on page 153
• "Admin Menu" on page 153

NOTE:

•

The access to the operator panel menus can be limited with a password by enabling the Panel Lock. For more
information, see

"Panel Lock Function" on page 167



Information Pgs

Use the

Information Pgs

menu to print the settings and history information of your printer.

NOTE:

•

A password is required to enter the operator panel menus when

Panel Lock Set

is set to

Enable

. In this

case, enter the password you specified, and press the

button.

Printer Settings

Purpose:
To print a list of the information such as the printer name, the status of the printer, and the network
settings.

Panel Settings

Purpose:
To print a detailed list of all the settings on the operator panel menus.

Job History

Purpose:
To print a detailed list of the print jobs that have been processed. This list contains the last 10 jobs.

Error History

Purpose:
To print a detailed list of paper jams and fatal errors.

Demo Page

Purpose:
To print a test page.

Summary of Contents for DocuPrint CP215 Series






















































































































































































































































Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands

Fuji Xerox DocuPrint CP215 Series, User Manual

Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands