Fuji Xerox DocuPrint CP215 Series User Manual Download Page 150

Page: 150 / 246

150

Printing Basics

Using the Printer Setting Utility to Change the Printer Settings
(Windows Only)

You can select menu items and corresponding values from the Printer Setting Utility.
The following procedure uses Windows 7 as an example.

NOTE:

•

Factory defaults may vary for different countries.
These settings are active until new ones are selected or the factory defaults are restored.

To select a new value as a setting:

Click

Start

→

All Programs

→

Fuji Xerox

→

Fuji Xerox Printer Software for Asia-Pacific

→

your printer

→

Printer Setting Utility

NOTE:

•

The

Select Printer

window appears in this step when multiple print drivers are installed on your

computer. In this case, click the name of the desired printer listed in

Printer Name

The Printer Setting Utility appears.

Click the

Printer Maintenance

tab.

Select the desired menu item.
Each menu item has a list of values for the menu item. A value can be:

•

A phrase or word to describe a setting

•

A numerical value that can be changed

•

An On or Off setting

Select the desired value, and then click the associated button with each menu item.

Note that the print driver settings have precedence over the settings made on the Printer Settings
Utility.

Summary of Contents for DocuPrint CP215 Series






















































































































































































































































Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands

Fuji Xerox DocuPrint CP215 Series, User Manual

Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands