Fuji Xerox DocuPrint C525 A User Manual Download Page 65

Page: 65 / 96

6.1 Replacing Consumables

Replacing the Drum Cartridge

The cleaning pad for inside of the printer is packed with the new drum cartridge. When
replacing the drum cartridge, also replace the cleaning pad.

Caution on Handling the Drum Cartridge

When handling the drum cartridge, take note of the following points:

WARNING

• Never throw a drum cartridge into an open flame. It can cause an explosion and you can

get burnt.

• Do not expose it to direct sunlight or strong light.

• Do not touch the surface of the photosensitive drum (blue colored part). Do not slam

anything into or scrape the surface of the photosensitive drum.

• Do not let the drum cartridge stand or place it upside down. The drum might be damaged.

Replacing the Drum Cartridge

Important

• Remove any print jobs from the center output tray and close the bypass tray cover before following the

next steps.

Open the front door, then the top cover.

Note
• First open the unit D if the optional duplex unit is

installed.

Important

• Do not touch any parts inside the printer.

Push up the lever on the right side of the
printer, grab the drum cartridge by the
handle, and pull it up and out slowly.

Cleaning pad

Drum cartridge

Summary of Contents for DocuPrint C525 A
































































































Search results

Summary of Contents for DocuPrint C525 A

Reviews:

Related manuals for DocuPrint C525 A

Brands by name

Popular brands

Fuji Xerox DocuPrint C525 A, User Manual

Search results

Summary of Contents for DocuPrint C525 A

Reviews:

Related manuals for DocuPrint C525 A

Brands by name

Popular brands