Fuji Xerox DocuCentre 1055, User Manual

Page: 49 / 245

49
3 Copy
This chapter describes how to use the copy features.
Copying Procedure
This section describes the basic copy procedure. Before making copies on the
machine, identify what is to be copied and the number of copies required. Follow the
steps below.
1. Load the Documents – page 49
2. Select the Features – page 52
3. Enter the Quantity – page 52
4. Start the Copy Job – page 53
5. Confirm the Copy Job in the Job Status – page 53
Stop the Copy Job – page 54
NOTE: If the Auditron feature is enabled, you may need a registered password for
each account before using the machine. To get the password, contact the System
Administrator. For information on how to enter a password, refer to
Auditron Access
Screen in the Product Overview chapter on page 47.
1. Load the Documents
Document input areas are as follows.
• Document feeder for single or multiple documents
• Document glass for single documents or bound originals
NOTE: The document glass cover will be fitted in the non-document feeder
configuration.
NOTE: The machine automatically detects standard document sizes. For more
information on paper sizes to be detected, refer to When Using the Copy Feature in
the Appendix chapter on page 214. Before loading the documents of non-standard
size, you need to select the paper tray. If the document size cannot be detected, the
machine will prompt you to select the paper tray. For information on how to select the
paper tray, refer to
Paper Supply on page 55 .