Fuji Xerox DocuCentre 1055, User Manual

Page: 35 / 245

Ground Fault Interrupter (GFI)
35
Powering Off
If the Fax option is installed, ensure that the <Jobs in Memory> indicator on the control
panel is off before you switch off the machine. If you switch off the machine while the
<Jobs in Memory> indicator is lit, and if left for more than 2 hours, all stored documents
will be deleted. After being charged 30 hours, the machine is able to keep the stored
documents for 2 hours.
NOTE: Wait at least 20 seconds between powering the system on and off. Otherwise,
the machine may not restart correctly.
Ground Fault Interrupter (GFI)
If a fault is detected in the power supply to the machine, a Ground Fault Interrupter
(GFI) device on the machine automatically cuts all electrical power. If power is
interrupted, locate the <RESET> button on the side of the machine. If the GFI has been
triggered, the <RESET> button will be in the tripped position. To restore power to the
machine, press the <RESET> button.
Before using the machine, press the <TEST> button. If the GFI is working properly, the
<RESET> button should pop up. If it does, press the <RESET> button.
NOTE: If the <RESET> button pops back up when you press it, or if power is not
restored by this procedure, contact our Customer Support Center.
Power Saver Modes
The machine has energy saving features that significantly reduce the power
consumption during inactivity. The <Power Saver> button is located on the upper- right
position of the control panel, and lights up when the power saving feature is enabled.
The power saving feature operates in the following two modes.
<TEST> button <RESET> button