Fuji Xerox DocuCentre 1055, User Manual

Page: 132 / 245

9 Setups
132
System Settings
This screen allows you to select features for the settings you want to configure or
change. For more information, refer to the following.
NOTE: If an error has occurred, such as running out of paper or removal of the paper
tray, [Print Settings] on the [System Settings] screen will not be available for selection.
Change Password – page 132
Common Settings – page 133
Auditron Administration – page 136
Copy Settings – page 138
Print Settings – page 142
Fax Settings – page 152
E-mail Settings – page 162
1.
Select [System Settings] on the System
Settings screen using the <Select>
button.
2.
Enter the correct System Administrator
password using the alphanumeric keypad on the control panel.
NOTE: The default System Administrator password is “11111”. To change the
password, refer to Change Password on page 132 .
3.
Select [Confirm] using the <Select> button or press the <Enter> button.
4.
Select the required option.
5.
Press the <Enter> button.
Change Password
This screen allows you to change the password required when you select [System
Settings] after pressing the <Log In/Out> button. A password can be specified within
the range of 1 to 12 digits.
1.
Select [Change Password] on the
[System Settings] screen using the
<Select> button.
2.
Press the <Enter> button.
3.
Enter a new password using the alphanumeric keypad on the control panel.
4.
Press the <Enter> button.
5.
Confirm the password by entering the same password as you entered in step 3.
6.
Press the <Enter> button.