Fuji Xerox DocuCentre 1055, User Manual

Page: 47 / 245

Auditron Access Screen
47
• Line Termination – Select the line termination from [Off], [Add-LF] (appends a line
feed to carriage return, [Add-CR] (appends a carriage return to line feed and form
feed), or [CR-XX] (appends a carriage return to line feed and form feed, and a line
feed to carriage return).
Auditron Access Screen
This feature electronically records the number of copies or prints made for each user
account, and controls the access and use of the machine. To enable this feature, you
need to login as System Administrator access and change the default setting of
[Auditron Mode] from [Off] to [On]. The System Administrator can change the password
or account limits for copy/print jobs. For more information, refer to
Auditron
Administration in the Setups chapter on page 136.
1.
Press the <Log In/Out> button on the
control panel.
2.
Select [System Settings] using the
<Select> button.
3.
Enter the System Administrator
password using numeric keypad.
NOTE: The default System Administrator
password is “11111”.
4.
Select [Confirm] using the <Select> button, or press the <Enter> button.
5.
Select [Auditron Admin.] on the [System
Settings] screen using the <Select>
button.
6.
Press the <Enter> button.
7.
Select the required option.
8.
Press the <Enter> button.
9.
Change the settings as required.
10.
Press the <Enter> button.
If the Auditron feature is enabled, enter a registered password for each account before
using the machine.
1.
Enter the password of each registered
account using the alphanumeric keypad
on the control panel.
2.
Press the <Enter> button.
<Log In/Out> button