5-5
5-2 NP1F-MP1 I/O Area
)
d
n
e
g
n
i
n
o
i
t
i
s
o
P
:
e
m
a
n
l
a
n
g
i
S
(
2
t
i
B
<Description>
• In the pulse generation mode, this signal becomes “1” when the positioning operation has ended. This signal also
becomes “1” when command pulse output is stopped or when the near-zero signal is “1” and the start command
signal is “0.”
After the positioning end signal becomes “1,” this signal continues to be “1” even if the near-zero signal changes.
Positioning end signal is “0” because
the command pulse is being output.
Positioning end signal is “1” because
the positioning end signal has been detected.
Outputting command pulse
(internal signal)
Near-zero
(PC <== MP1)
Positioning end
(PC <== MP1)
“1”
“1”
“1”
“0”
“1”
Precautions:
This signal becomes “0” while the start command is “1.”
• In the position command mode, the positioning end signal becomes “0” while the start command is “1.”
When the start command becomes “0,” pulse output is immediately stopped.
After this, the positioning end signal becomes “1” when the near-zero signal becomes “1.”
“1”
Positioning end
(PC <== MP1)
“1”
Near-zero
(PC <== MP1)
“1”
Start command
(PC == > MP1)
Operates according to position data.
Summary of Contents for micrex-sx NP1F-MP1
Page 1: ...FEH214a series USER S MANUAL PULSE TRAIN POSITIONING CONTROL COMBINED MODULE...
Page 28: ...3 10 3 4 Dimensions 3 4 1 NP1F MP1 for 1 axis 3 4 2 NP1F MP2 for 2 axes 90 46 5 75 35 105...
Page 29: ...3 11 3 4 Dimensions 3 4 3 NP2F LEV Signal converter 95 47 2 10 29 8 39 8 85 95 40 36 6...
Page 223: ...Section 8 Troubleshooting Page 8 1 LED Indication 8 1 8 2 Error Indication 8 2...
