ENGLISH
CE DECLARATION OF CONFORMITY
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol
indicates notes that are important for the safety of persons and for the good condition of the
automated system.
The symbol
draws your attention to the notes on the characteristics and operation of the product.
Manufacturer:
FAAC S.p.A.
Address
:
Via Benini, 1 - 40069 Zola Predosa BOLOGNA - ITALY
Declares that:
Control unit mod.
E604 24V
• conforms to the essential safety requirements of the following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by FAAC S.p.A.).
Bologna, 10-10-2007
Managing Director
A. Bassi
INDEX
. DESCRIPTION
page.2
2. TECHNICAL SPECIFICATIONS
page.2
3. PREPARATIONS
page.2
4. BOARD LAY-OUT
page.3
5. CONNECTION LAY-OUT
page.3
6. DESCRIPTION OF CONNECTIONS
page.3
6.. TERMINAL BOARD CN
page.3
6.2. TERMINAL BOARD CN2
page.4
6.3 MOTOR CONNECTION
page.5
6.4. BATTERY KIT
page.5
7. DIP-SWITCH ADJUSTMENT
page.5
7.. OPEN BEAM FUNCTION
page.6
8. MEMORY STORING THE RADIO CODE
page.6
8.. Memory storage of DS radio controls
page.6
8.2. Memory storage of SLH radio controls
page.6
8.3. Memory storage of LC radio controls
page.7
8.4. Deletion of radio codes
page.7
9. OBSTACLE DETECTION SENSITIVITY
page.7
0. PROGRAMMING
page.8
. CONTROL LEDs
page.8
2. FUNCTION LOGICS
page.9
