Fuji Electric micrex-sx NP1F-MP1, User Manual

Page: 152 / 250

5-97
5-3 I/O Area of NP1F-MP2
2) Read register
Bit No. 12
8 to 12 Target frequency register 0 0 0 0 0
11 10 9 8
Description
Base frequency register 0 0 0 0 1
Current frequency register 0 0 0 1 0
Command pulse register 0 0 0 1 1
Deceleration point register 0 0 1 0 0
Acceleration/deceleration register 1 0 0 1 0 1
Acceleration/deceleration register 2 0 0 1 1 0
Speed multiplication register 0 0 1 1 1
Command pulse counter 0 1 0 0 0
Target frequency FIFO buffer 0 1 0 0 1
Command pulse register FIFO buffer 0 1 0 1 0
0 1 0 1 1
(Not used) 0 1 1 0 0
0 1 1 0 1
Error monitoring timer register 0 1 1 1 0
Control register 0 1 1 1 1
Backlash register 1 0 0 0 0
Near-zero monitor register 1 0 0 0 1
Deviation-over monitor register
High-speed limiter register
1 0 0 1 0
1 0 0 1 1
1 0 1 0 0
1 0 1 0 1
1 0 1 1 0
1 0 1 1 1
Pulse count setting buffer, lower 1 1 0 0 0
Pulse count setting buffer, middle 1 1 0 0 1
Pulse count setting buffer, upper 1 1 0 1 0
ulse count setting buffer, 16 1 1 0 1 1
(Not used) 1 1 1 0 0
1 1 1 0 1
1 1 1 1 0
1 1 1 1 1
13 Reserved
14 Reserved
15 Data read command for each register Data read command
(Not used)
Reserved
Delay time register
Feedback pulse multiplication register
Precaution:
Assign “0” for unused and reserved signals.