34
TN4FCXA2
j
-EDF-
E
10.5 ~ 45 V DC (Analogique)
16.1 ~ 45 V DC (Smart)
Sortie courant 4 ~ 20mA
Bornier
CK
+
CK
–
+
–
Convertisseur
Borne de terre extérieure
4.3 – Earthing
Perform the earthing in compliance with the recommendations below.
1- Standard use (without special protection)
Several earth terminals are available on the transmitter. They are on the outside of the
box next to each cable inlet, and on the inside on the terminal block. A resistance of 100
ohms maximum is recommended for proper earthing.
2- Use in dangerous zone
In the case of anti-explosion protection by means of an enclosure or intrinsic safety, use
the earthing terminal located inside, on the terminal block.
Earthing terminal
(inside)
