IP PBXs USER MANUAL
www.fs.com
92
Destination
is the IP address of the destination host or network address.
If the packets are to be sent to the
Destination
specified above then send them to the
Gateway
address.
After the new record has been manually created you will see it listed in the route table.
12.3.7
DHCP Server
Path:
System -> Network Settings -> DHCP Server
DHCP (Dynamic Host Configuration Protocol) is a standardized network protocol used on Internet Protocol (IP) networks for dynamically
distributing network configuration parameters, such as IP addresses for interfaces and services.
With DHCP, computers/IP phones request IP addresses and networking parameters automatically from IPPBXs WAN/LAN port which
saves administrators a lot of time when compared with having to configure these settings manually.
Before activating DHCP services, please ensure there’s no other DHCP server running in your LAN, otherwise there will be collision
between servers.
Set the DHCP server network parameters and turn it on.
The DHCP clients which obtained IP addresses from the IPPBX system DHCP server will be listed on the right side of the page, in the
DHCP Clients
section.