FS PBX-C301, User Manual, Page: 44 / 113

IP PBXs USER MANUAL
www.fs.com
40
 In the Dial Rules section by moving the dial rules from the Available Rules field to the Selected Rules field to enable the dial
rules in this dial permission. In the above given example, 2 dial rules had been enabled. The “call-pstn” rule is used to make phone
calls through CO lines (land lines). The “call-voip” rule is used to make phone call through the SIP trunk. So if you assign this dial
permission to the extension users, they will be able to make outbound phone call both through CO lines and the SIP trunk.
 In the Internal Permissions section by switching the internal call features on/off to enable/disable the call features.
 Extension : Allow/Disallow dialing other extension numbers.
 Paging & Intercom : Allow/Disallow dialing paging & intercom group numbers.
 Department
: Allow/Disallow dialing other department numbers.
 Call Parking : Allow/Disallow answering the parked calls.
 Conference : Allow/Disallow using conference feature.
 Call Pickup : Allow/Disallow pickup phone calls on other extensions.
 DISA : Allow/Disallow using DISA feature.
 Call Queue
: Allow/Disallow dialing the call queue numbers.
 Feature Codes : Allow/Disallow using feature codes.
 Call Spy : Allow/Disallow spying on other extensions’ phone calls.
 IVR : Allow/Disallow dialing IVR extensions.
 Seize CO Line : Allow/Disallow the extension user to dial the FXO trunk BLF code to seize the line and make outbound phone
call directly.
By default all extensions use the default dial permission “DialPlan1”, if you have created new dial permissions, please don’t forget to
assign them to the extensions from Telephony -> Extensions -> IP Extensions and Telephony -> Extensions -> Analog Extensions (if
there are analog extensions) page.