IP PBXs USER MANUAL
www.fs.com
75
12.2
Region and Time
Path:
System -> Region and Time
System time is very important for the IPPBX system, especially when the IPPBX system handles inbound phone calls according to time
conditions, then only if the system time is correct will calls be handled properly. Also, call logs and call recordings files are named with
system time. If time’s not correct on the system, the phone system will not work properly.
At the initial setup while you going through the quick setup wizard your location would be set. If you had skipped the quick setup
wizard or you want to change the time zone, you may do it here.
Location and time may be configured separately. Both modifying location and time settings requires rebooting the IPPBX system.
The location settings will determine the type of tone (Dial tone, Busy, Congestion tone, etc.) you heard on the phones, the time zone and
also the opermode on the
Analog Settings
page. So you may not change the location settings here but adjust the time settings only.
You may set the Time Zone and NTP Server to let the IPPBX system synchronize time from the NTP server. This is by default how the
system time works.
Or you may manually configure the system time.
In the Set Current PBX Time blank, you may manually input the date and time to set it as the current PBX time or you may click on
to synchronize the current time of your operating system. Then click on
button to save the manually set time to
the IPPBX hardware.
12.3
Network Settings
12.3.1
Network Profiles
Path:
System -> Network Settings -> Network Profiles
Network profiles could be configured through the quick setup wizard at the initial setup of the IPPBX system. When modification of the
network profiles required, it could be done here.