FS PBX-C301, User Manual, Page: 71 / 113

IP PBXs USER MANUAL
www.fs.com
67
10.13
Other feature codes
 Announce WAN Port IP
: By dialing this code you'll hear the system announce the IP address of the IPPBX WAN interface.
 Announce LAN Port IP : By dialing this code you'll hear the system announce the IP address of the IPPBX LAN interface.
 Announce Extension Number : By dialing this code you can check the extension number of your phone, either it’s an IP phone or
analog phone.
 One Touch Recording : One Touch Recording is also known as Record on Demand. It allows users to record phone calls selectively.
In a live call conversation, an extension user can use feature code *1 to record this call. With this feature, you don’t have to
configure recording all calls for the extensions which may cause heavy system resource use if some call recordings are not
required.
 Intercom : The intercom feature code allows you to intercom one extension only. You don’t have to create a “Paging and Intercom”
group for only one extension if you intend to intercom with only that extension.
 Paging
: The paging feature code allows you to page one extension only. It’s the same as the intercom feature code, the only
difference between paging feature code and intercom feature code is by using intercom feature code both sides can talk to each
other but using paging feature code, only the caller can talk to the called party.
 Speed Dial : Use speed dial feature code with contact speed dial number to call a contact instead of dial the contact’s actual
number.
 Meet Me Page
: Meet Me Page can be used to page someone over the phones/speakers. The paged person can use this feature
code to terminate the paging and establish an intercom call with the initiator.
 Switch Phone : When the extension is registered on several different endpoints, you may dial *3 from an idle endpoint to switch
the call to the idle endpoint.
 Audio Console : By dialing *911 to make live announcements to the speakers connected to the Audio Out interface.