FS PBX-C301, User Manual, Page: 95 / 113

IP PBXs USER MANUAL
www.fs.com
91
 Server IP : L2TP server public IP.
 Username : L2TP VPN user name given by the VPN server.
 Password
: L2TP VPN user password given by the VPN server.
 Enable IPSec : Enable IPSec support.
 IPSec Local IP : IPPBX WAN IP Address that can access the Internet.
 IPSec Password: Set according to the password specified on the server.
 Default Gateway : All traffic goes through the L2TP VPN connection.
Once done, click on submit to save the configurations. Finally click on Enable switch to switch on the L2TP client connection.
Notice
If connection is successfully established, the system will display as follows:
Status: L2TP client VPN remote IP address 172.16.0.1
L2TP client VPN local IP address 172.16.0.x (An IP address between 172.16.0.2 and 172.16.0.9)
12.3.6 Static Routing
Path: System -> Network Settings -> Static Routing
Static Routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from a
dynamic routing protocol to forward traffic.
When needed you may click on the button to add a manual static route.