IP PBXs USER MANUAL
www.fs.com
76
The WAN network interface of IPPBXs could be configured to work in Static IP, DHCP or PPPoE mode. In most cases assign a static IP
would be the best practice. As all the IP phones will communicate with the IPPBX through this IP address.
On WAN port, gateway and DNS could be configured so the IPPBX could have Internet access, as a result, SIP trunking and remote
extensions could work.
As for LAN, it’s only used when you don’t want the IPPBX system to have Internet access.
Default IP on LAN port is 192.168.10.100, you may change this IP but LAN IP should NOT be in the same network segment as WAN port.
12.3.2
IPv6
Path:
System -> Network Settings -> IPv6
IPv6(Internet Protocol Version 6) has been in development for nearly two decades. Now the next-generation protocol is ready to replace
IPv4 and assume its place as the back of the Internet.
Today, major Internet service providers (ISPs), home networking equipment manufacturers, and web companies around the world are
permanently enabling IPv6 for their products and services. Many organizations, institutions and universities have deployed their own
networks on IPv6.
To be able to deliver VoIP calls over IPv6(SIP over IPv6), you can configure IPPBX system with IPv6 addresses to be able to deploy it in
your IPv6 network infrastructure.