5.3.3 Set Country
It used for positioning the Robomow globally. This operation is important, as the
Robomow needs to be able to adjust the sensitivity of the magnetic navigation system to its
location on the globe. This process should be done only once, prior to the first automatic
operation. This is a preliminary step to
DK Calibration
.
DK Calibration
will not succeed
without first setting the country location.
5.3.4 DK Calibration
The DK (Direction Keeping) calibration calibrates the Robomow to the magnetic fields in
the customer’s yard.
A. Enter
DK Calibration
in the ‘Service’ menu.
B. Verify that
Set Country
is already set at the correct country for use.
C. Insure the Robomow is positioned on a leveled and smooth surface inside the perimeter
wire. It should not be placed close to anything that could alter the earth’s magnetic field
such as buried or overhead power lines, large metal objects or concrete floors with steel
reinforcing bars for example.
D. Turn the Perimeter switch on and perform the
DK Calibration
as shown in the sequence
below:
Wait…
The mower will now rotate 2-4
turns. Wait until calibration is
completed.
Press the GO button
Press the GO button
Activate motors
Confirm
DK Calibration
Press GO
Retry elsewhere
Test passed
Press C
If the calibration was not successful
this message will be displayed. Move
the mower a few meters/feet and try
to calibrate again. If the unit shows
this message after four attempts,
refer to fault code table (section 5.6)
When calibration is completed a
‘Test passed’ will be displayed.
5
7
Summary of Contents for robomower RL1000
