Friedrich FSHW091, Service And Parts Manual

Page: 81 / 171

81 PB
If fixed-angle swing function is not available for the connected unit, this
function will be cancelled automatically after setting.
This function is only available in cooling mode.
When this function has been set, set temperature is displayed in SE.
In this case, temperature setting and fan speed setting are shielded.
This function and sleep function cannot be on simultaneously. If I-demand
function is set firstly and then sleep function is set, I-demand function will be
cancelled while sleep function will be valid, and vice versa.
3.7.5 Absence Function Setting
Note:
Note:
Note:
3.7.3 Health Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select health function
and press “
＜
” or “
＞
” button to turn on or turn off health function with auto saving.
● This function is only available in heating mode.
● When this function has been set, set temperature is displayed in 8
℃
(46
℉
). In this
case, temperature setting and fan speed setting are shielded.
● This function will be cancelled when switching modes.
●
●
●
●
●
This function and sleep function cannot be on simultaneously. If absence function
is set firstly and then sleep function is set, absence function will be cancelled while
sleep function will be valid, and vice versa.
3.7.6 Memory Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select memory
function and press “
＜
” or “
＞
” button to turn on or turn off memory function with auto
saving.
3.7.7 Fixed-angle Swing Mode Setting
After entering user function page, press “
∧
” or “
∨
” button to select holiday function
option and press “
＜
” or “
＞
” button to turn on or turn off this function with auto saving.
This function is used to maintain indoor temperature so that unit can realize fast
heating.
After entering user function page, press “
∧
” or “
∨
” button to select IDEMAND
function option and press “
＜
” or “
＞
” button to turn on or turn off this function with auto
saving.
After entering user function page, press “
∧
” or “
∨
” button to select lock swing
function option and press “
＜
” or “
＞
” button to turn on or turn off this function with auto
saving.
3.7.4 I-DEMAND Function Setting
Wired Controller FSWC1 Owner's Manual
10
This function will be cancelled when switching modes.
WIRED CONTROLLER
Operation Instructions