Fri-Jado MCC 120, Service Manual

Page: 54 / 105

Page 54 Service Manual MCC Cold US 20220700
Checking the SET temperature
1. Unlock the keypad by pressing and holding for at least 3 seconds.
2. Press and release
SET
to access the “
Machine status
” menu.
3. Scroll through the folders with and until you find the folder Pb1 , Pb2 or Pb3 .
4. Press SET to view the value measured by the corresponding probe.
Notes:
• The displayed value cannot be changed.
• Folder Pb2 can only be viewed on models that manage probe Pb2 .
• Folder Pb3 can only be viewed on models that manage probe Pb3 .
Adjusting the SET Temperature
1. To unlock the keypad, press and hold for at least 3 seconds, until the label “
UnL
”
appears.
2. Press and release
SET
to access the “
Machine status
” menu.
3. Scroll through the folders with and until you find the folder SEt .
4. Press SET to view the current set point value.
5. Change the set point value using and within 15 seconds.
6. To confirm the value press
SET
or , let a timeout occur (15 seconds).
Checking the product temperature
• Once every hour, the product temperature should be checked using a digital thermometer,
write down the measured values in a log.
• Always use a disinfected thermometer sensor.
Switching off
• Remove all products from the unit.
In order to avoid temperature rise of the products, store them in another cooling unit.
• Switch the cooling off.
7.0
Operation MCC Cold