Fri-Jado MCC 120, Service Manual, Page: 34 / 105

Page 34 Service Manual MCC Cold US 20220700
5.3
MCC Cold Drop-in Requirements Self Serve
Important remark before installation:
When installing Front doors on the drop in unit, Please follow Front door installation
procedure, until step in which the glass is put in.
Placing the doors in a later stage, means the unit must be lifted again.
Installation must comply with:
• No spark-forming components or components with a high surface temperature
(according to IEC 60079-15) may be present in the substructure/counter where the
counter is placed
• The refrigeration components must not be directly accessible by unauthorized
personnel (according to IEC 60335-2-89)
• Make sure that the counter is still easily accessible for service after installation by
means of a removable hatch.
The condenser must be cleaned regularly
• Keep enough space on the back of the unit, to enable servicing which implies the
back panel of the counter can be removed
• Provide enough space to place the counter with a stacker.
Maintain the dimensions and minimum height as indicated in the installation manual
(also applies to hot units)
• Provide adequate ventilation; keep the minimum air inlet and outlet opening as
indicated in the installation manual.
Place baffles to prevent hot exhaust air from being sucked back through the
condenser
• Make sure that the room/shop in which the furniture is placed meets the minimum
dimensions as indicated in the installation manual
• All warning signs/labels, minimum floor area label (Cold unit) and data plate must remain
visible after installation
• Operation of the appliance must be accessible.
• Additional ventilation: prevent gas accumulation due to leakage.
• Avoid high temperatures (> 200 ° C) in the vicinity of the furniture