Fri-Jado MCC 120, Service Manual, Page: 13 / 105

Service Manual MCC Cold US 20220700
Page 13
Put the thick or thin plastic washer
(depending on leveling) on the bottom hinge
pin of the door. Do this at all doors.
Place the hinge pin with the nylon washer
on in the bottom hole (A). Keep the door in a
tilted position during this action.
Press the hinge pin at the upper side
downwards. Turn the door in a ´vertical´
position so the upper hinge pin will align with
the upper hole. Release the hinge pin into
the upper hole (B).
Be sure inside the hole a nylon bearing is
placed, in the bottom holes as well as in the
top holes.
If both hinge pins are correctly clicked into
the bottom and upper hole, the door is
mounted correctly.